Galileo
 

Galileo Solar Filters allow you to safely view the Sun up close through your Telescope or Binoculars.

GALILEO “SAFE SUN SOLAR FILTERS” CONFORM TO REQUIREMENTS OF [ISO 12312-2:2015 (E)]: “FILTERS FOR DIRECT OBSERVATION OF THE SUN”

   
   
CAUTION – NEVER LOOK DIRECTLY INTO THE SUN WITH THE NAKED EYE OR POINT YOUR TELESCOPE OR BINOCULAR WITHOUT THE USE OF A PROPER SOLAR FILTER.  VIEWING THE SUN WITHOUT THE CORRECT SOLAR FILTER CAN RESULT IN PERMANENT OR IRREVERSIBLE EYE DAMAGE.

 

GALILEO G-SFB40 Solar Filter Cap designed to fit Cassini and Galileo 40mm Binoculars

M.S.R.P. $39.95

 Filter CAP... measurement is approximately 2" (51mm inner diameter) in width...

Not sure if it will fit other brands of Binoculars with 40mm Objective lenses. Measure the outside diameter size of the binocular at the objective lens. Should measure 50 - 51mm for this cap to fit snuggly.  The included Spacer Material may be needed to attach the Filter Cap to your Binocular to attach snug.

Actual Filter is 25mm

GALILEO G-SFB50 Solar Filter Cap designed to fit Cassini and Galileo 50mm Binoculars

M.S.R.P. $39.95

 Filter CAP... measurement is approximately 2.5" (63mm inner diameter) in width...

Not sure if it will fit other brands of Binoculars with 50mm Objective lenses. Measure the outside diameter size of the binocular at the objective lens. Should measure 62 - 63mm for this cap to fit snuggly.  The included Spacer Material may be needed to attach the Filter Cap to your Binocular to attach snug.

Actual Filter is 25mm

GALILEO G-SFB60 Solar Filter Cap designed to fit Cassini and Galileo 60mm Binoculars

M.S.R.P. $39.95

 Filter CAP... measurement is approximately 3" (69mm inner diameter) in width...

Not sure if it will fit other brands of Binoculars with 60mm Objective lenses. Measure the outside diameter size of the binocular at the objective lens. Should measure 68 - 69mm for this cap to fit snuggly.  The included Spacer Material may be needed to attach the Filter Cap to your Binocular to attach snug.

Actual Filter is 25mm

GALILEO G-SFB70 Solar Filter Cap designed to fit Cassini and Galileo 70mm Binoculars

M.S.R.P. $39.95

 Filter CAP... measurement is approximately 3.25" (84mm inner diameter) in width...

Not sure if it will fit other brands of Binoculars with 70mm Objective lenses. Measure the outside diameter size of the binocular at the objective lens. Should measure 83 - 84mm for this cap to fit snuggly.  The included Spacer Material may be needed to attach the Filter Cap to your Binocular to attach snug.

Actual Filter is 25mm

GALILEO Solar Filter Cap designed to fit Cassini and Galileo 50mm and 60mm Refractor Telescopes

M.S.R.P. $39.95

 Filter CAP... measurement is approximately 3.5" (86mm outer diameter) in width...

Not sure if it will fit other brands of Refractor Telescopes with 50mm to 60mm Objective lenses. Measure the inside diameter size of the sunshade at the objective lens. Should measure 86 - 87mm for this cap to fit snuggly.  The included Spacer Material may be needed to attach the Filter Cap to your Telescope to attach snug.

Actual Filter is 50mm

GALILEO Solar Filter Cap designed to fit Cassini and Galileo 72mm, 80mm, 90mm Refractor Telescopes

M.S.R.P. $39.95

 Filter CAP... measurement is approximately 4.25" (98mm outer diameter) in width...

Not sure if it will fit other brands of Refractor Telescopes with 72mm, 80mm and 90mm Objective lenses. Measure the inside diameter size of the sunshade at the objective lens. Should measure 97-98mm for this cap to fit snuggly.  The included Spacer Material may be needed to attach the Filter Cap to your Telescope to attach snug.

Actual Filter is 50mm

GALILEO Solar Filter Cap designed to fit Cassini and Galileo 80mm, 90mm, 95mm Reflector Telescopes

M.S.R.P. $39.95

 Filter CAP... 125mm inner diameter in width...
 
Not sure if it will fit other brands of Reflector Telescopes with 80mm, 90mm, 95mm Primary mirrors. 
Measure the outside diameter size of the telescope tube, or depending on your telescope, the outside diameter size of the secondary mirror cell if that’s where the cap goes - should measure 126-127mm outside diameter for this cap to fit snuggly.  The included Spacer Material may be needed to attach the Filter Cap to your Telescope to attach snug.

Actual Filter is 50mm
 

CAUTION – NEVER LOOK DIRECTLY INTO THE SUN WITH THE NAKED EYE OR POINT YOUR TELESCOPE OR BINOCULAR WITHOUT THE USE OF A PROPER SOLAR FILTER.  VIEWING THE SUN WITHOUT THE CORRECT SOLAR FILTER CAN RESULT IN PERMANENT OR IRREVERSIBLE EYE DAMAGE.

 

Site Map | Home | Reflector | Refractor | Dobsonian | Tri-Centric | Catadioptric | Wide Angles | Galileo Porro Prisms | Zooms | Galileo Zooms | Long Eye Relief | Water Proof | Astronomical |
GG Series | Phase Coated | Roof Prisms | Mini Compacts | Compacts | Compact Zooms | Binocular Cameras | Hunting Products | Imaging Systems
Gadgets & Gizmos | Galileo´s Closet | Sale | About Galileo | Contact Us

Web Design & Development by Gianfranco.us